2418-Tabletop,iPad Charge + Sync Security Cabinet

 The iPad Charge + Sync tablet cabinet makes it easy to keep your ios devices secure and up-to-date all in one location.

Cabinet Features

  • With the capability to charge and sync up to 16 devices simultaneously, our tablet cabinet accomidates all iOS and Android devices. Keep your devices secure and up-to-date all in one location
  • PSSI P-Hub Circuit board allows full 2.1A current to charge each device to its full charging potential
  • Our "Bring Your Own Cable" design features a USB port on the top of each slot to accept both Apple lightning and 30 pin cords. 
  • Front faceplate and individual slot LEDS will let you know if a device is charging or syncing 
  • Sync your devices over WIRE using the custom P-Hub, or sync WIRELESS to itunes or cloud services.
  • Over-current and over-temperature alarms will keep your devices save by shutting down ports with a potential hazard. 
  • Circuit board and power supply directly communicate to shut down idle and unused ports to conserve energy
  • Stong, 2-point locking doors swing fully out of the way while the cabinet is in use.
  • The cabinets small footprint makes it the perfect device storage solution in a classroom, hospital, or any area where space is limited. 

Options

  • Custom shortened USB device cables are available for a clean and tidy installation .

Custom Sizes or Modifications

PSSI will work with you to design a custom cabinet size, drawer size, combination of drawer sizes, or cabinet color to make sure that you recieve a complete solution for your project.

 two cabinet 4

slots 

Ready for any iPad Model

Each slot comes equipped with a USB header so you can use Lightning cables or the original 30 pin cables.

portlights2

Individual Slot LEDs

Each device slot has its own LED to keep you informed on wether your device is charging or syncing

sidedoor1

270 Degree Swing Doors

Doors swing fully open to maximize counter space and are secured with a 2 point locking system

 backofcab

Ventilated Rear Panel

Perferations allow airflow to keep cabinet component operating temperatures low.

rear plug

USB Uplink and Power

Connect a computer to the USB uplink. Cabinet runs on 115-220V.

WT1

2.1A High Power USB Hub

Our Custom USB hub provides up to 2.1A of current to each device. The board has temp and over-current alarms to keep your devices safe, along with port status LEDs.

WT2

Add an Access Point or Router

The tablet cabinet has room in it's top compartment for accessory devices. Adding a wireless router or access point can increase your signal strength.

Cabinet Control via LCD Keypad Display

  • Charge, sync, and manage up to 32 devices simultaneously (2x 16 port boards). Our p-Hub Power Kit accomidates all iOS, Android, and USB devices.
  • Full control over each port, change one port or all ports from charge mode to sync mode by using the LCD scren and keypad.
  • Set customizable charge profiles for each port, this will display a charge percentage based on the devices current draw.
  • Charge profiles will also give each port a "time till charged" counter, profile coundown times are adjustable for better accuracy.
  • Use the LCD Screen to view device charge percentages, connection times, power draw, and much more.
  • Controll fan speeds, temperature set points and temperature monitoring from the LCD screen.
  • Custom circuit board allows 2.1A current to charge each device to its full charging potential
  • Our "Bring Your Own Cable" design features a USB port on the top of each slot, so you care free to charge and sync any mix-and-matched devices
  • Sync your devices over WIRE using the custom USB hub, or sync WIRELESS to itunes or cloud services.
  • Over-current and over-temperature alarms will keep your devices save by shutting down ports with a potential hazard.
  • Circuit board and power supply directly communicate to shut down idle and unused ports to conserve energy.

phub lcd2

 Model Selection Chart

Model Number

Description

Width

Height

Depth

in

mm

in

mm

in

mm

CSC-2418-16

16 Port Charge + Sync Cabinet

24.00"

609.60mm

17.25"

438.15mm

17.75"

450.85mm

Individual Slot Dimensions

1.14"

28.95mm

9.50"

241.30mm

11.50"

292.1mm

 

 GSA2 Like many of our other ESD safe products, our Dock & Lock computer storage cabinet and laptop security cabinet models are patented. Plug-In Storage Systems, Inc., a Veteran owned Small Business, is an approved Government Supplier under contract GS-27F-0424G